beautypg.com

Smart Technologies SMART Board Interafctive Whiteboardd PMWT-660/680 User Manual

Page 11

background image

PMWT-660/680 Installation Guide

9

4. Attach the lower support to the wall mount bracket by inserting two No. 8-32 × 1/2" security

hex screws in the third hole from the top, as shown in the diagram below. Leave the screws
loose enough to allow for movement of the lower support.

5. Align the vacant screw holes on the lower support with the ones on the upper support, and

insert a No. 8-32 × 1" security hex screw in each side.

NOTE: The location of the vacant holes differs between the projector mounts for the 660 and
680, as shown in the following two diagrams.

Attaching the Upper and Lower Support for a 660

Attaching the Upper and Lower Support for a 680

Wall Mount

Lower
Support

Upper
Support

Vacant
Screw Hole

Upper Support

Lower Support

Vacant
Screw Hole

Lower Support

Upper Support