Siemens Hicom cordless EM Convenience mobile unit 2000C pocket User Manual

Page 8

Telephone functions

This display when the mobile is
on is a prerequisite and initial status
for all telephone functions (see also
"Radio range" on page 8).

✂✁✂✄✆☎✞✝

✟

✠

✡

☛

or an other name may be

displayed (see page 46) depending
on the current base (system).

☞

Press the talk key -

the user’s own

mobile phone number appears in the
display.

✌

Enter the internal number when the
you hear the dial tone –

the entered

digits are displayed.
See also Note.

Call

Conduct the call –

the name or the

number of the user is displayed.

Ending a call

✍

Press the on-hook key or place the
mobile unit in the charging shell.

Note:

●

You can use the menu key

✎

or the display key

to call up the short cut list and start your short

cuts when setting up a connection or when a call is in
progress.

●

All functions concluded with the on-hook key

✏

can also be concluded by inserting the mobile unit
into the charging shell.

●

All functions can be cancelled with the on-hook
key

✏

Internal dialling

✆✁✆✄✆☎✒✑

✆✁✆✄✆☎✔✓

✖

✗

✘

✙

✚

✛

✜

Note:
The dialled number is automatically stored for number
redial, see page 22.

☞

Press the talk key -

the user’s own

mobile unit number appears in the dis-
play.

External code
e.g.

✢

Enter the external code, e.g. "0",
when you hear the dial tone.

✌

Dial the external number -

the entered

digits are displayed.
See also Note.

Call

Conduct the call.

Ending a call

✍

Press the on-hook key or place the
mobile unit in the charging shell.

The mobile unit’s ringing tone is audible. The caller’s
name is displayed if the caller is an internal user. The
number or the name is displayed if the caller is an external
user (as for optiset telephones).

●

The mobile unit is in the charging shell:

✣

Simply remove the mobile unit from
the charging shell*.

Only if Auto Talk is activated – see also page 48.

●

The mobile unit is not in the charging shell:

✤

Press the talk key.

Ending a call

✥

Press the on-hook key or place the
mobile unit in the charging shell.

External dialling

Note:

The dialled number is automatically stored for number
redial.

Answering calls

Telephone functions

En-bloc dialling means that you enter the number first (up to
32 digits), if necessary correct it and then press the talk key
to dial.

✦

Enter the internal number or "external
code", e.g. "0" and the external
number.
If necessary, use the

and

display keys to correct the

entries.

✤

Press the talk key (within 30 seconds)
–

the entered number is dialled.

Ending a call

✥

Press the on-hook key or place the
mobile unit in the charging shell.

En-bloc dialling for internal/external dialling

✧

★

✩

Note:

Refer also to the notes under "Internal/External dialling",
see page 19 and 20.

Telephone functions