Siemens Hicom cordless EM Convenience mobile unit 2000C pocket - Manual (Page 20)

55
Settings
You can use this function to reset your mobile unit to the
defined default state, e.g. if you are handing over your
mobile unit to another user.
Press the menu key.
Scroll to
✁✄✂✄☎✆☎✞✝ ✟✡✠✄☛
and confirm.
Scroll to
☞✆✌✆✟✎✍✆☛✡✂✄☎✏✁✆✂✡☎✄☎✑✝ ✟✡✠✆☛
and confirm.
Scroll to
✒ ✟✞✝ ☎✞✝ ✌✔✓✄✝ ✕✄✌✄☎✔✝ ✖✆✟
and confirm.
PIN Enter the mobile unit PIN
and confirm.
Resetting the mobile unit to the default state
Note:
● Resetting the mobile unit to the default state deletes
the redial numbers.
● The mobile unit PIN and system registration
(logon) are, however, not deleted.
● See the next page for settings in the default state.
✗
✘✚✙✆✛✚✛✡✜ ✢✤✣✤✥
✦✚✧
✗
★✚✩✚✢✤✪✤✥✚✙✤✛✫✘✤✙✤✛✚✛✄✜ ✢✤✣✤✥
✦✚✧
✗
✬ ✢✭✜ ✛✡✜ ✩✡✮✤✜ ✯✤✩✤✛✄✜ ✰✚✢
✦✚✧
✦✚✧
56
Settings
Settings after the mobile unit has been reset:
Telephone directory: Retained
Short cuts: Retained
Redial: Deleted
Mobile unit PIN: As per last save
System registration: Retained
Language: German*
Automatic call acceptance: On
Automatic backlight: On
Select Services menu: Active*
Ringer tone: 1
Ringer volume: 6
Handset volume: 1
Different beeps: See overview page 49
* For international mobile unit variant: English language; S-S menu inactive .
57
Appendix
Before contacting the Service department, you should
attempt to correct any errors yourself:
Troubleshooting
Error Possible cause Remedy
No display. Mobile unit not
switched on.
Battery empty.
Press the On/Off
key.
Recharge the battery
or replace it with a
spare battery.
✱✳✲✳✴✳✴✤✵ ✶✳✷✡✸✺✹✳✵✆✻ ✵✳✼✚✽✳✵
is displayed as soon
as you press the talk
key.
No dial tone; no calls
can be made.
cordless EM is fully
utilised by other
users. Try again later.
No radio connection
possible to base sta-
tion,
✾
✼ ✽ ✵❀✿ flashes.
The mobile unit is
outside the radio
range of the base
stations; radio signal
too weak.
The mobile unit is not
registered.
Excessive delay
between synchroni-
sation attempts.
Move into radio
range, change loca-
tion.
Register mobile unit.
Switch off mobile unit
and switch it back on
again.
✾
✼✳✽✚✵❁✿ is displayed,
for example, but no
incoming or outgoing
calls are possible.
Activation/deactiva-
tion not possible.
The mobile unit is
blocked. Open the battery
compartment lid and
close it again.