Siemens Hicom cordless EM Convenience mobile unit 2000C pocket - Manual (Page 6)

13
General
Display key for cancelling functions/
returning to the next menu level up.
On-hook key for ending calls or for cancelling
functions and returning to the "on" status
immediately.
The currently selected (highlighted) function is displayed
on a dark background.
A dotted line indicates the end of the menu. If you scroll
further, the first function in the menu is selected again.
When the "line" is selected, press the
display key
to jump back to the higher-level menu or to the "on" status
display.
Function selection via codes
(switching functions)
Most switching functions, for example, the callback or shut-
tle functions, can be executed using codes.
You will find an overview of all executable functions on page
27.
✁
✂☎✄✝✆☎✞✠✟☛✡
14
Putting the mobile unit into service
.
● Hold the mobile unit with the dialling keypad facing
downwards (see Figure 2). A battery compartment for
the battery is located in the lower part of the mobile unit.
● To open the battery compartment, grip the lid by the
grooved edges and slide it away from the mobile unit (see
Figure 2).
● Insert the battery supplied in the battery compartment as
shown in Figure 2.
Ensure that the battery is inserted correctly (polarity illus-
trated on the label in the battery compartment).
The battery compartment cannot be closed if the battery
is inserted incorrectly!
● Slide the lid back over the battery compartment (see Fig-
ure 2) until it clicks into place.
inserting batteries into the mobile unit
Note:
● Read the safety precautions on page 2 first!
● Only use the battery supplied or the following
replacement battery:
Sanyo 2HF-B1U (2.4 V; 880 mAh)
Item code number: C39153-Z7-C3