Smeg C9GMXA - Manual (Page 17)

Instructions for the user
19
10.ELECTRONIC PROGRAMMER
On appliances with double oven, the electronic programmer only controls the main oven.
LIST OF FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
COOKING DURATION BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
10.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals, showing
. Press the and keys together, and at the same time
press the or keys: this will increase or decrease the setting by one minute for each pressure.
Before each programmer setting, switch on the function and set the temperature required.
10.2 Semiautomatic cooking
This function only switches the oven off automatically at the end of the cooking time.
Press the
key and the display will light up showing the figures ; keep it pressed, and at the same
time use the value modification keys or to set the cooking duration. When the key is released,
the count of the programmed cooking duration will start and the display will show the current time
together with the symbols A and .
10.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the
key and the display will light up showing the figures ; keep it pressed, and at the same
time use the value modification keys or to set the cooking duration.
Press the key and the display will show the sum of the current time plus the cooking duration: keep it
pressed, and at the same time use the value modification keys or to adjust the end of cooking
time.
When the
key is released, the programmed count will start and the display will show the current time
together with the symbols A and
After making the setting, press the key to view the cooking time remaining; press the key to view the
cooking end time . The logic prevents the setting of incompatible values (e.g. the timer will not accept
a cooking end time with a duration which is too long for this value).