Sharp DT-200 - Manual (Page 37)

E-36
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
1 Press MENU. The “Picture” menu screen appears.
2 Press / to display the “Options” menu screen.
3 Press / to select “OSD Display”.
4 Press / to select “ON” ( ) or “OFF” ( ).
5 To exit the menu screen, press MENU.
On-screen Display
Description Selected item
ON ( )
OFF ( )
Description of OSD Display
All On-screen Display are displayed.
INPUT is not displayed.
2,3,4
1, 5
2,3,4
1, 5
On-screen Display
This function allows you to select the input signal type
Component or RGB for INPUT 2.
1 Press MENU. The “Picture” menu screen appears.
2 Press / to display the “Options” menu screen.
3 Press / to select “Signal Type”, and then
press .
4 Press / to select “RGB” or “Component”.
5 To exit the menu screen, press MENU.
“RGB” or “Component” can be selected with the
RGB/COMP. button on the remote control only in
INPUT 2.
Selecting the Signal Type
RGB/COMP. button
DT-200(E)#p36_40.p65 02.11.21, 11:42 AM 36