Sharp DT-200 - Manual (Page 31)

E-30
Basic Operation
Adjusting the Picture
Adjusting the Color Temperature
This function allows for selecting the desired color
temperature from six settings. With the lower value
selected, the projected image becomes warmer,
reddish and incandescent-like while with the higher
value, the image becomes cooler, bluish and
fluorescent-like.
Description of Color Temperature
1 Press MENU. The “Picture” menu screen appears.
2 Press / to select “CLR Temp”, and then press
.
3 Press / to select the desired color
temperature setting.
4 Press ENTER to save the setting.
5 To exit the menu screen, press MENU.
• Values on “CLR Temp” are only for general standard
purposes. The less the value is set to, the warmer, reddish,
incandescent-like the image becomes. The more the value
is set to, the cooler, bluish, fluorescent-like the image
becomes.
• “CLR-Temp” cannot be used in the DIGITAL INPUT mode.
On-screen Display
2, 3 4 1, 5
Emphasizing the Contrast
This function emphasizes the bright portions of images
to obtain a higher contrast image.
Description of White Emphasis
1 Press MENU. The “Picture” menu screen appears.
2 Press / to select “White Emphasis”.
3 Press / to select the desired white emphasis
setting.
4 To exit the menu screen, press MENU.
On-screen Display
1, 4 2, 3
Description Selected item
For emphasizing the bright portions of images
For disabling “White Emphasis”
ON ( )
OFF ( )
DT-200(E)#p26_32.p65 02.11.21, 11:38 AM 30