Siemens Gigaset CL100 - Manual (Page 21)

21
Base station settings
Gigaset CL100 / HGK eng / A31008-A221-H100-1-7619 / settings_bs_hs.fm / 20.11.2003
Restoring the handset factory settings
You can restore individual settings and changes to the original factory (default) settings
(for an overview of the handset default settings see page 24). Entries in the directory,
the caller list, the last number redial list, and the speed dial list as well as registration of
the handset with the base are retained.
MENU
¢ O I ¢
RESET ?
¢
OK
Press a and hold (return to idle status).
Base station settings
All base station settings are made via a registered Gigaset CL 1 handset.
Changing the system PIN
To protect the system settings from unauthorised access you should change the system
PIN (factory setting: 0000) to a PIN that only you know.
MENU
¢
BASE SET
¢
SYSTEM PIN
¢
Enter the currently valid 4-digit system PIN and press
¢
OK.
¢
Enter the new 4-digit system PIN and press
¢
OK.
¢
Enter the new 4-digit system PIN again
¢
OK.
Press a and hold (return to idle status).
Restoring base station to factory (default) settings
A reset does not alter the system PIN; handsets remain registered (for an overview of
base station default settings see page 24).
MENU
¢
BASE SET
¢
BASE RESET
¢
Enter system PIN
¢
OK
¢
RESET ?
¢
OK