Setting the handset’s volume, Changing the channel, Using redial – Sprint Nextel SP-809 User Manual
Page 19

19
Telephone Operation
SETTING THE HANDSET’S VOLUME
You can select any of three
volume levels by repeatedly
pressing
VOLUME
during a
call. Three short beeps sound
when the handset is at the
highest setting. If you press
VOLUME again, the handset
returns to the lowest setting.
CHANGING THE CHANNEL
The SP-805 scans 25 channels (frequency pairs used between the
base and the handset) and automatically selects a clear channel
each time you make or receive a call.
If you hear other conversa-
tions or excessive noise dur-
ing a call, press
CHANNEL
on
the handset to select a differ-
ent channel.
Note: If the handset is too far from the base, the channel might not
change. Move closer to the base and try again.
USING REDIAL
You can quickly redial the last
number dialed. Simply lift the
handset and press
PHONE
.
When you hear the dial tone,
press
REDIAL
.
PHONE
REDIAL
43-5805.fm Page 19 Wednesday, August 18, 1999 1:22 PM