Changing the remote access code, Setting the handset’s ringer – Sprint Nextel SP-809 User Manual
Page 17
17
Preparation
CHANGING THE REMOTE ACCESS CODE
The remote access feature allows you to access the answering
system from a touch-tone phone. The remote access code is pre-
set to 500, but you can change it to any three-digit number from
500 to 999.
To change the remote access code, press
CHANGE
then repeated-
ly press
SET UP
until you hear “Remote access code is …” and fol-
low the voice prompt instructions. Press
STOP
when you are done.
SETTING THE HANDSET’S RINGER
You can turn off the handset’s
ringer by setting
RINGER
on
the side of the handset to
OFF
. Turn it back on by set-
ting
RINGER
to
ON
.
43-5805.fm Page 17 Wednesday, August 18, 1999 1:22 PM