Instructions for the user, Description of controls – Smeg SUK90MFX5 User Manual

Page 11

Instructions for the user

5. DESCRIPTION OF CONTROLS

5.1 Front control panel

All the cooker controls and commands are on the front panel.

If the cooker is equipped with an electronic programmer, before using the oven make sure that
the symbol

; appears on the display. See paragraph “8. ELECTRONIC PROGRAMMER”.

DESCRIPTION OF SYMBOLS

FRONT RIGHT BURNER

CENTRAL BURNER

BACK RIGHT BURNER

ELECTRIC OVEN THERMOSTAT

BACK LEFT BURNER

ELECTRIC OVEN FUNCTION KNOB

FRONT LEFT BURNER

HOB BURNER COMMAND KNOB

The flame is lit by pressing the knob and turning it anticlockwise to minimum
flame

. To adjust the flame turn the knob between maximum ( ) and

minimum ( ). The burner goes out when the knob is returned to the position

ELECTRIC OVEN THERMOSTAT KNOB

Selection of cooking temperature is carried out by turning the knob
clockwise to the required temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning light will come on when
the oven is heating up. When it goes out it means that the required
temperature has been reached. Regular flashing means that oven
temperature is being constantly maintained at the programmed level.

This manual is related to the following products:

SUK90MFX