Delayed fax – Samsung SF-555P User Manual
Page 78
3.29
Stand-alone Fax
Delayed Fax
The SF-555P can be set to send a fax at a future time.
1. Load your document face down with the top edge first going into the
document feeder. And adjust Resolution and Contrast, if necessary.
For details, see
2. Press Advanced FAX on the front panel. The display shows the first
menu; BROADCASTING.
3. Press
➛ or ❿ until ‘DELAYED FAX’ appears, and press Start/Enter to
access the Delayed FAX menu.
4. Enter the number of the remote machine using the ten number
keypad.
You can also press a one-touch button including group dial buttons. If
not, press Speed(#), enter a 2-digit speed dial number, then press
Start/Enter. The stored number appears on the display.
5. Press Start/Enter to confirm the number. The display asks if you
want to enter another fax number.
7. The document will be scanned into memory. The display shows the
memory capacity and the number of pages being stored. The machine
begins sending the documents in order of the numbers you entered.
Notes:
• If ‘MEMORY FULL’ occurs while scanning into the memory, the
display will show:
Press
➛ or ❿ to select the option you want. If you select
Cancel, broadcasting is cancelled. If you select Done, your
machine performs broadcasting only with the pages already
scanned.
• If an error occurs while sending to a specific number, the machine
transmits the document to all the other numbers, then retries the
number that previously recorded an error. After completing
transmission, your machine prints the multi-communication
report.
ENTER ANOTHER NO
JOB
❿CANCEL❿DONE