Samsung SF-555P - Manual (Page 50)

3.1 Stand-alone Fax
Setting Volume
Ringer Volume
You can adjust the volume of the ringer to your desired volume.
1. Press
➛ or ❿ in Standby mode.
The display shows the current ringer volume setting.
2. Press
➛ or ❿ until you find the desired loudness. Four levels are
available; 0~3.
You will hear the selected volume and the display will show the level.
Setting ‘0’ turns the ringer off. The machine will work normally even if
the ringer is set to off.
3. Press Start/Enter to save the setting.
Speaker Volume
1. Press OHD/V.Req to adjust the speaker volume. If you cannot hear
dial tone, check the phone line connection.
2. Press
➛ or ❿ repeatedly until you find the desired loudness.
The display shows the current volume level.
3. After choosing the desired volume level, press OHD/V.Req.
Setting up Stand-
alone Fax System
RINGER VOL.[3]
SPEAKER VOL.[2]