Samsung SF-555P - Manual (Page 65)

3.16 Stand-alone Fax
Receiving Manually in TEL Mode
You can answer calls using the handset, and start the machine to receive
a fax.
1. Press and hold down Rcv.Mode/Contrast repeatedly until the display
shows ‘TEL
MODE.’
2. When the telephone rings, pick up the handset and answer it.
3. If you hear a fax tone, or if the person on the other end asks you to
receive a document, press Start/Enter.
4. Replace the handset. The machine begins receiving and returns to
Standby mode when the reception is complete.
Receiving Manually Using an Extension
Telephone
This features works best when you are using an extension telephone
connected to the EXT. jack on back of your machine (see
page A.
2
). You
can receive a fax from someone you are talking to on the extension
telephone without having to go to the fax machine.
1. When you receive a call on the extension phone and hear fax tones,
press the keys “ 9 ” (star nine star) on the extension telephone.
The machine receives the document.
Press the buttons slowly in sequence. If you still hear the fax tone
from the remote machine, try pressing “
9 ” once again.
“ 9 ” is the remote receive start code preset at the factory. The
first and the last asterisks are fixed, but you can change the middle
number to whatever you choose. For more information, see
page 3.5 .
2. When you have finished speaking and receiving documents, replace
the handset of the extension telephone.