Sennheiser 2020 User Manual

Page 26

Putting the components into operation

Inserting/Changing batteries or accupack in the
bodypack transmitter

For powering the transmitter, use either the
rechargeable BA 2015 accupack

or two 1.5 V AA

size batteries. Do not use any other rechargeable
batteries!

Open the battery compartment by pressing the two
release buttons

and open the cover

Insert the batteries or the BA 2015 accupack

shown in the diagram on the left. Please observe
correct polarity when inserting the batteries/
accupack.

Close the battery compartment cover

Connecting the microphone to the bodypack
transmitter

Note:

Suitable Sennheiser microphones are listed on
page 7.

Connect the microphone to the bodypack
transmitter's microphone input

Lock the plug by screwing down the coupling ring.

Adjust the sensitivity of the microphone input, as
described on page 37.

Connecting external audio source to the bodypack
transmitter

You can connect an external audio source, such as a CD
player, MP3 player, tape player, etc. to the bodypack
transmitter. (Please note that you cannot connect a
second microphone.) Both signals – the microphone