Sennheiser 2020 User Manual

Page 25

Putting the components into operation

Inserting/Changing batteries or accupack in the
wireless microphone

For powering the wireless microphone, only use either
the rechargeable BA 2015 accupack

or two 1.5 V

AA size batteries.

Unscrew the display unit

in the direction of the

arrow (counterclockwise) on the handle of the
wireless microphone

Pull out the display unit

fully.

Open the cover

of the battery compartment.

Insert the batteries or the BA 2015 accupack as
indicated on the compartment. Please observe
correct polarity when inserting the batteries/
accupack.

Close the cover

Push the battery compartment into the handle of
the wireless microphone.

Screw the display unit on again.

Note:

Always charge the accupack in the charging
compartment

of the charging case (see

“Charging the BA 2015 accupack” on page 30).