Sennheiser 2020 - Manual (Page 24)

22
Putting the components into operation
Putting the components into
operation
Setting up the charging case
Note:
The charging case as well as the accupacks and the
receivers' built-in rechargeable batteries will get hot
during charging. Please ensure the following so that
the generated heat can dissipate:
y The air vents
¸
of the charging case must not be
covered or blocked.
y The charging case must be kept away from heat
sources and must never be exposed to direct
sunlight.
y During charging, do not put the case cover on the
charging case.
The charging case has four plastic feet to ensure that
it cannot slip on the surface on which it is placed.
̈
Place the charging case on a flat, even surface.
̈
Connect the supplied mains cable to the IEC mains
socket
¹
on the charging case.
̈
Connect the cable to the mains.
Note:
The case cover can be used as a stand for the
charging case (see diagram on the left).
¹
Some furniture surfaces have been
treated with varnish, polish or synthetics
which might cause stains when they
come into contact with other synthetics.
Despite a thorough testing of the
synthetics used by us, we cannot rule out
the possibility of staining. CAUTION!