Sanyo DSR - 300 - Manual (Page 81)

80
English
SE
TTIN
GS
MENU 2>
7
POWER FAILURE/USED TIME
\
You can check the date/time of power failures and the
amount of hard disk operation time.
1
Press the [MENU] button twice.
The
2
Press the [ ] or [ ] button to select
“7. POWER FAILURE/USED TIME” and
press the [ ] button.
The screen is
displayed.
Use this screen to check the date/time of power failures
and the amount of hard disk operation time.
(1) FAILURE:
Displays the date/time of the last power failure.
The number on the left is the number of power failures.
(example: #018) Resets to “000” after exceeding “999”.
(2) RECOVER:
Displays the most-recent time at which the power was
restored.
(3) DISK1 USE:
Displays the total amount of disk 1 operation time.
(4) POWER:
Displays the amount of power ON time for the digital video
recorder.
(5) FIRMWARE:
Displays the current version of firmware.
3
Press the [EXIT/OSD] button.
The display returns to the normal screen.
[ ] button
[MENU] button
[ ] button
[ ] button [EXIT/OSD] button
(1)
(2)
(3)
(4)
(5)
e00_l8had_us_7.book Page 80 Wednesday, March 10, 2004 2:47 PM