Sanyo DSR - 300 User Manual
Page 31
SEARCHING FOR RECORDED IMAGES
6
30
English
OPERATION
Lets you search and play back all the alarm images stored
in the alarm recording area. If pre-alarm images are being
recorded, playback will start from immediately before the
alarm.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The
2
Check that “ALARM SEARCH” is
selected, and press the [ ] button.
The
(1) NO:
Displays the alarm number.
(2) DATE/TIME:
Displays the date/time at which the alarm was received
and the image recorded.
(3) TOTAL ALARMS:
Displays the total number of recorded alarm images.
(4) Preview screen:
Displays the selected alarm image.
3
Press the [
] or [
] button to select
the image to play back.
The selected alarm image is displayed in the preview
screen. You can display up to 8 alarm images.
z
To display the next (previous) image
Press the [
] or [
] button.
z
To display the items on the next page
Press the [ALARM] button. The next 8 items are
displayed chronologically.
z
To end search mode
Press the [SEARCH] button.
4
Press the [ ] button.
The selected image is
played back on the full
screen.
To display pre-alarm images
After starting playback of alarm images found using an
alarm search, press the [ ] button to activate reverse
playback.
1
During playback, press the [ALARM]
button.
z
Playback will skip to the next earlier alarm image when
the
button is pressed.
z
Playback will skip to the next later alarm image when
the
button is pressed.
z
When playback is performed using an alarm search, the
image at the start and end of each alarm recording will
be paused.
Play the final alarm image using the [ALARM] button.
ALARM SEARCH
[SEARCH] button
[ALARM] button
[
] button
[
] button
[
] button
(1)
(3)
(2)
(4)
Skipping can be carried out during playback
05- 20- 04 ALARM 0003
01: 06: 00 EN
10FPS
e00_l8had_us_7.book Page 30 Wednesday, March 10, 2004 2:47 PM