Sanyo DSR - 300 - Manual (Page 133)

132
English
SPECIFICATIONS
Note that product appearance and specifications are subject to change without prior notice.
Specifications
Television system NTSC color signal standard
Picture resolution 720 x 240 (field), 720 x 480 (frame)
Compression M-JPEG
Picture quality 5 levels - Super Fine, Fine, Enhanced, Normal, and Basic
Recording type Frame or field
Recording rate 27 levels
Recording areas Normal recording area, alarm recording area, and archive area
Playback Playback, still, and search
Search mode
Date/time search Search by date and time
Alarm search Search from alarm list
Alarm thumbnail search Search from alarm thumbnails
Archive area search Search from archive area
Motion detection search Search motion detected using motion sensors
Menu language English/French/Spanish
Clock settings Month/Day/Year/Hours/Minutes/Seconds
Video input terminal 1 V (p-p), 75 Ω unbalanced, BNC connector
Video output terminal 1 V (p-p), 75 Ω unbalanced, BNC connector
Video loop output terminal 1 V (p-p), 75 Ω unbalanced, BNC connector
Audio input terminal -8 dBs, 27 k Ω unbalanced (RCA pin jack)
Audio output terminal -8 dBs, 600 Ω unbalanced (RCA pin jack)
CompactFlash card slot CompactFlash Type 2 (front panel)
Option board
(sold
separately)
RS-232C terminal 9-pin D-SUB (to PC)
RS-485 terminal RJ-11 x 2
LAN (100BASE-TX) terminal RJ-45
Terminals
Alarm input terminal Normal open, Low level active
Alarm output terminal Normal 5 V DC, Low level active
Alarm reset input terminal Normal open, Low level active
SW output terminal Switching pulse
Non rec output terminal Normal 5 V DC, Low level active
Clock adjust input terminal Normal open, Low level active
Clock adjust output terminal Normal 5 V DC, Low level active
Warning output terminal Normal open, Low level active
Full warning output terminal Normal 5 V DC, Low level active
Alarm full output terminal Normal 5 V DC, Low level active
Series input terminal Normal 5 V DC, Low level active
Series output terminal Normal open, Low level active
AC adapter Input: 100 to 240 V AC, 50/60 Hz Output: 12 V/5 V DC
Current consumption 13 W
Allowable operating temperatures 5°C to 40°C
Allowable operating humidity 10% to 80%
Dimensions 210 (W) x 96 (H) x 380 (D) mm
Weight 3.1 kg
e00_l8had_us_7.book Page 132 Wednesday, March 10, 2004 2:47 PM