Sanyo DSR - 300 - Manual (Page 65)

64
English
SE
TTIN
GS
MENU 1>
8
ALARM REC MODE SET
\
Follow the procedures below to select the recording
picture quality, recording method (i.e., frame or field),
audio recording, and recording rate for the alarm recording
area.
1
Press the [MENU] button.
The
2
Select “8. ALARM REC MODE SET” and
press the [ ] button.
The screen appears.
3
Press the [ ] button.
“ENHANCED” flashes.
4
Press the [ ] or [ ] button to select
the picture quality.
[Settings] (‹ indicates default setting.)
5
Move the cursor to “FRAME/FIELD
RECORDING” and press the [ ] button,
then press the [
] or [ ] button to
change the setting.
[Settings] (‹ indicates default setting.)
6
Move the cursor to “AUDIO
RECORDING” and press the [ ] button,
then press the [
] or [ ] button to
change the setting.
When this is set to “ON”, the letter “A (indicating that audio
will be recorded)” is displayed in front of “REC RATE”, and
the maximum number of images that can be recorded is
displayed at the bottom of the screen.
[MENU] button [ ] button
[ ] button
[ ] button
[EXIT/OSD] button
Setting alarm recording
Setting Description
SUPER FINE Super Fine: 50 kB
FINE Fine: 42 kB
‹ ENHANCED Enhanced: 30 kB
NORMAL Normal: 22 kB
BASIC Basic: 15 kB
Setting Description
‹ FIELD Sets the recording method to field.
FRAME Sets the recording method to frame.
e00_l8had_us_7.book Page 64 Wednesday, March 10, 2004 2:47 PM