Sanyo DSR - 300 - Manual (Page 101)

MENU-SPECIFIC SETTINGS 2
100
English
NETWO
R
K
SE
T
T
IN
G
S
(when optional interface board is installed)
When a multiplexer (sold separately) has been connected
to the unit, you can make settings as described below.
Set the connected multiplexer’s manufacturer as described
below.
1
Select the manufacturer of the
multiplexer from the screen’s pull-down
menu.
[Settings] (‹ indicates default setting.)
z When a Sanyo, Sony, DM, Robot multiplexer or any
other multiplexer capable of decoding channel
information is connected, it will be possible to specify
channel numbers for playback. For details regarding the
playback method, see “Playing back recorded images”
(JP. 113).
3. VIDEO INPUT SET
Multiplexer
Setting Description
‹ NO USE
This item should be selected when no
multiplexer is being used.
SANYO
As these multiplexers can decode channel
information, whenever multiplexer images are
being recorded, you will be able to indicate a
camera number (i.e., channel information) from
the recorded images for playback.
OTHERS1
This item should be selected when using a Sony
multiplexer. Decoding of channel information will
be possible.
OTHERS2
This item should be selected when using a DM
or Robot multiplexer. Decoding of channel
information will be possible.
OTHERS3
This item should be selected when using a
multiplexer that has not been manufactured by
Sanyo, Sony, DM, or Robot.
e00_l8had_us_7.book Page 100 Wednesday, March 10, 2004 2:47 PM