Sony KL-W9000 - Manual (Page 8)

– 8 –
10 -EN Getting Started
Connecting two VCRs for editing
The monitor outputs signals from the VIDEO IN jacks
through the VIDEO OUT jacks. With two VCRs
connected to the VIDEO IN and VIDEO OUT jacks, you
can edit the tape.
Note
For the RGB signal input from the RGB 1/2 IN
connectors, the monitor outputs only the audio signal.
Connecting the AC power cord
Connect the supplied power cord to the AC IN socket
of the monitor and to a wall AC outlet.
RGB 1 IN
AUDIO
L R RGB
VIDEO IN
S VIDEO
VIDEO
R
L
AUDIO
VIDEO
OUT 1 3
Connecting to video equipment
To a VCR not equipped with an S video
connector
You can also use the VIDEO 2 IN jacks on the front of
the monitor for the video/audio connections.
To an S video equipped VCR
Rear of the monitor
to VIDEO 1 IN or
VIDEO 3 IN
VMC-810S/820S
(not supplied)
VCR
to video/audio outputs
to VIDEO 1 IN or
VIDEO 3 IN
YC-810S
(not supplied)
VCR
to S video/audio outputs
Rear of the monitor
VMC-810S/
820S
(not supplied)
VCR for playback
VMC-810S/820S
(not supplied)
VCR for recording
Rear of the monitor
to an AC outlet
AC power cord
(supplied)
to AC IN
Note
When you connect the cable to both the VIDEO jack and the S
VIDEO connector, the picture from the S VIDEO connector is
displayed on the monitor screen.
Rear of the monitor
to video/audio
outputs
to video/
audio
inputs
RGB 1 IN
AUDIO
L R RGB
VIDEO IN
S VIDEO
VIDEO
R
L
AUDIO
VIDEO
OUT 1 3
RGB 1 IN
AUDIO
L R RGB
VIDEO IN
S VIDEO
VIDEO
R
L
AUDIO
VIDEO
OUT 1 3
to VIDEO OUT
to VIDEO 1 IN
or VIDEO 3 IN
Getting Started 11 -EN
EN
OPTION N
AUTO SHUT OFF:OFF
LANGUAGE: ENGLISH
Step 3: Setting up
the remote
control
Inserting batteries
Insert two size AA (R6) batteries (supplied) by
matching the + and – on the battery to the diagram
inside the battery compartment.
Notes
• Under normal conditions, batteries will last up to six months.
If the remote control does not operate properly, the batteries
may be worn out. When replacing batteries, replace both of
them with new ones.
• Do not mix old batteries with new ones or mix different types
of batteries together.
• If the electrolyte inside the battery should leak, wipe the
contaminated area of the battery compartment with a cloth and
replace the old batteries with new ones. To prevent the
electrolyte from leaking, remove the batteries when you don‘t
plan to use the remote control for a long period of time.
• Do not handle the remote control roughly. Do not drop it, step
on it, or let it get wet.
• Do not place the remote control in direct sunlight, near a
heater, or where the humidity is high.
If you prefer Spanish or French to English, you can
change the menu language.
1
Press MENU.
2
Press V or v to select OPTION, and press
ENTER.
3 Press V or v to select LANGUAGE, and press
ENTER.
4
Press B, V, v or b to select your favorite
language, “ENGLISH,” “FRANCAIS (French)”
or “ESPANOL (Spanish).”
5
Press MENU to return to the original
screen.
Notes
• You can operate the menu using the buttons on the monitor.
The VOLUME + button functions the same as V and b, and
VOLUME – as v and B.
• You cannot use the AUTO SHUT OFF function for the input
from VIDEO IN. (See page 22.)
Changing the menu
language
MENU
ENTER
ENTER
CENTER/ SIZE
VOL
ENTER
MENU