State Industries GS675YRVIT - Manual (Page 7)

7
(a) vent pIpe
(B) anode
(c) hot water outlet
(d) outlet (120 vac)
(e) flue Baffle
(f) Gas supplY
(G) MaIn Manual Gas
shut off valve
(h) Ground joInt unIon
(j) sedIMent trap (drIp leG)
(K) outer door
(l) unIon
(M) Inlet water shut
off valve
(n) cold water Inlet
fIGure 1.
replaceMent parts and delIMInG products
Replacement parts and recommended delimer may be ordered
through authorized servicers or distributors. Refer to the Yellow Pages
for where to call or contact the water heater manufacturer at, 500
Tennessee Waltz Parkway, Ashland City, TN 37015. When ordering
parts, please call 1-800-821-2017 and provide complete model and
serial numbers (see rating plate), quantity and name of part desired,
see Figure 1. Standard hardware items may be purchased locally.
(o) Inlet dIp tuBe
(p) teMperature and
pressure relIef valve
(q) ratInG plate
(r) InsulatIon
(s) vent terMInal
(t) draIn valve
(u) IGnIter and MaIn
Burner
(v) flue
(w) Metal draIn pan
(X) control
(Y) control harness*
(Z) Motor & Blower
(aa) condensate fIttInG
(u) propane Gas MaIn Burner
wIth IGnIter asseMBlY
(sIde vIew)
tYpIcal InstallatIon
Install therMal eXpansIon
tanK If water heater Is
Installed In a closed
water sYsteM.
vacuuM relIef valve
*Install per local
codes
teMperature adjustMent Buttons
teMperature IndIcators
(u) natural Gas MaIn Burner
wIth IGnIter asseMBlY