Sharp FO-4450 - Manual (Page 96)

Duplex Scanning for Two-sided Documents
94
Duplex Scanning for Two-sided Documents
To transmit or copy documents which have printing or graphics on both sides
of the page or pages, use Duplex Scanning. With this function, you simply
feed the document (all pages) through the machine once, turn the stack of
pages over, and feed it through again.
♦
The machine will automatically sort the pages into the correct order (front of
1st page, back of 1st page, front of 2nd page, back of 2nd page, etc.).
♦
Duplex Scanning can be used for copying (single copies and sorted
multiple copies only) and any type of transmission from memory.
♦
Note that any blank sides must be included when scanning the pages (if the
number of pages is not equal each time the machine scans the stack, an
error will result). The blank sides will not, however, be printed out.
1
Load the document (s).
•
Make sure the page(s) are front face
down, with the first page on the bottom.
•
SEND READY will appear in the
display.
2
Press and then .
3
Perform all steps of the desired copy or memory transmission.
4
When all pages of the document have been scanned, turn the stack over
(do not change the page order) and load it again.
5
Press .
DUPLEX SCAN START/
ENTER
START/
ENTER