Sharp FO-4450 - Manual (Page 76)

Polling
74
Polling Security
Polling Security allows you to prevent unauthorized polling of your fax. When
this function is activated, polling will only take place when one of the following
conditions is met:
♦
The fax number of the polling fax machine has been stored in your fax’s list
of permitted fax numbers (called "passcode numbers"). The polling fax
must also have its fax number programmed in itself, as explained in
Entering Your Name and Fax Number in Chapter 1.
♦
A System number has been programmed in the polling fax machine which
matches your fax’s System number or one of your ID numbers.
♦
An ID number has been programmed in the polling fax machine which
matches your fax’s System number.
System and ID numbers are 4-digit numbers which provide you with an
alternate means of giving and receiving polling permission when you don’t
want to use fax numbers. The steps for programming these numbers are
described in the following pages.
Note: System and ID numbers can only be used if the other fax machine is also a
Sharp machine.
Turning Polling Security on and off
Polling Security is turned on or off with Option Setting 8 as explained on page
108.
Storing and clearing fax numbers for polling permission
You can store up to 10 fax numbers in your fax’s list of permitted numbers.
1
Press , , , .
2
Press to set a number.
(Press to clear a number.)
MENU
3 0 2
1
2
Display:
02:PASSCODE # MODE
1=SET, 2=CLEAR
1:PASSCODE SETTING
ENTER # (01-10)