Sharp FO-4450 - Manual (Page 138)

136
QUICK REFERENCE GUIDE
SENDING FAXES
Place the document (up to
50 letter-size pages) face
down in the document
feeder.
(Note: For Normal Dialing and Direct Keypad
Dialing, you can also load the document after
dialing the number.)
Press or if needed.
Normal Dialing
1. Lift extension phone or press .
2. Dial the fax number (if using an extension
phone, dial on the extension phone keypad).
3. Wait for the reception tone (if a person
answers, ask them to press their Start key).
4. Press .
Rapid Key Dialing
Press the desired Rapid Key.
Speed Dialing
1. Press and enter the desired Speed
Dial number (press if you entered a 1-
digit number).
2. Press .
Direct Keypad Dialing
1. Dial the fax number.
2. Press .
BROADCASTING
1. Load the document and press .
2. Dial destination numbers:
Press a Rapid Key.
RESOLUTION CONTRAST
SPEAKER
START/
ENTER
SPEED DIAL
START/
ENTER
START/
ENTER
START/
ENTER
BROADCAST
Press a Group Key.
Press and enter a Speed Dial
number (press to complete entry if
only one digit is entered).
Enter a full number and press .
3. When finished, press .
4. Press or if needed.
5. Press
STORING AUTO DIAL NUMBERS
1. Press , , , .
2. Press to store a number .
(Press to clear a number.)
3. To store a Rapid Key number, press the
desired Rapid Key.
To store a Speed Dial number, press
and enter a number from 1 to 75 (press
if you entered a 1-digit number).
(If clearing a number, select it as explained
above and then perform Steps 7 and 9.)
4. Enter the full fax number.
5. Press .
6. Enter a name by pressing the letter keys.
7. Press .
8. Press if this is a Chain Dial number.
Press if this is a regular number.
9. Press repeatedly to exit.
SPEED DIAL
START/
ENTER
START/
ENTER
START/
ENTER
RESOLUTION CONTRAST
START/
ENTER
MENU
3 0 1
1
2
SPEED DIAL
START/
ENTER
START/
ENTER
START/
ENTER
1
2
STOP