Sharp FO-4450 User Manual

Page 113

Optional Settings

111

6. Optional

Settings

Setting 18: RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each memory

retransmission attempt. Enter

for 1 minute,

for 2 minutes,

etc., up to a maximum of 15 minutes. If you do not want the fax to wait

between attempts, enter

♦

Initial setting: 02

Setting 19: POWER SAVE MODE
To conserve power, you can have the laser printer heater in your fax machine
turn off when not in use. When this is done, the heater will turn on
automatically when you receive a document (there will be a slight delay before
printing while the heater warms up) and turn off when printing is completed.

Press

to turn on Power Save mode, or

to turn it off.

♦

Initial setting: 1

Setting 20: ANTI-JUNK FAX

Press

to block reception from fax numbers entered in the Anti Junk Fax

List. Press

to allow reception from all numbers.

♦

Initial setting: 2

Setting 21: ALARM VOLUME
This sets the volume of the beep sound that alerts you to error conditions and

informs you that operations have been completed. Press

for HIGH,

for LOW, or

for OFF.

♦

Initial setting: 2

Setting 22: DIAL MODE

This sets the dial mode. Press

if you are on a touch-tone line, or

you are on a pulse dial (rotary) line.

♦

Initial setting: 1