Sharp FO-4450 - Manual (Page 38)

Programming Auto-Dial Numbers
36
•
If Option Setting 26 (TEL. BILLING CODE, page 112) has been set to ON
and BILLING CODE DIAL has been set to AFTER, press after
dialing.
4
Wait for the connection. When you hear a fax tone, press on the
fax machine.
•
If a person answers and you are using an extension phone, ask them to
press their Start key. When you hear the fax tone, press on your fax
machine.
REDIAL
START/
ENTER
START/
ENTER
Using the REDIAL key
You can press to redial the last number dialed. To send a document,
press when you hear the fax tone after the connection is established.
Note that the speaker is automatically activated when you press .
REDIAL
START/
ENTER
REDIAL
Programming Auto-Dial Numbers
You can dial a fax number by simply pressing a Rapid Key, or by pressing
and entering an abbreviated Speed Dial number.
To use a Rapid Key or Speed Dial number, you must first program the full fax
number in the Rapid Key or Speed Dial number. It is usually convenient to
program your most frequently dialed numbers in Rapid Keys.
♦
Up to 59 Rapid Keys can be programmed for shared use.
♦
Up to 75 Speed Dial numbers can be programmed for shared use.
You can also create personal books for auto-dial numbers. Up to 59 Rapid
Keys and 16 Speed Dial numbers can be stored in each personal book. For
information on creating and using personal books, see page 50.
SPEED DIAL