Star Micronics ATAR LC-500 - Manual (Page 31)

– 27 –
Control panel functions in off-line mode
Line feed
Press the LINE FEED button once to feed the paper one line. Holding
down the LINE FEED button continually feeds the paper, 1/6” (default)
at a time, until you release the button.
The line feed is executed using the current line feed value. In Self Test
mode, this button is ignored. While this button is held down, line feed is
executed up to 13 times. If the button is held down after 13 times of line
feed, the paper is continuously fed to the top of the next page. If the ON
LINE button is pressed while this button is held down, form feed is
executed.
Set/Park/Eject
Press the SET/PARK/EJECT button to set, eject, or park the paper.
If the paper is not loaded (paper end condition), paper loading is
executed. After the paper is loaded completely, the printer switches on-
line mode. If the paper is loaded (not paper end condition), the paper is
parked when using fanfold paper or ejected when using cut-sheet paper.
After the paper is parked or ejected completely, the printer switches to
off-line mode.
Form feed
While holding down the LINE FEED button, press the ON LINE button
to feed the paper to the top of the next page. If EDS2C-2 is ON (default)
when using cut-sheet paper, this function executes paper ejection.
Paper Condition
Paper End Not Paper End
When using fanfold paper Paper load (Paper set) Paper park
When using cut-sheet paper Paper load (Paper set) Paper eject