Star Micronics ATAR LC-500 - Manual (Page 25)

– 21 –
9. Close the tractor covers. At this point you can make final adjustments
to the paper position by releasing the gray levers and moving the
tractors. The paper should lie flat with no buckling or bulging (tractors
too close) or no stretching or elongation of the holes (tractors too far
apart). After making these adjustments, be sure that you re-lock the
tractors by pushing the gray levers back into their original positions.
10. Turn the power on.
11. Press the control panel’s SET/PARK/EJECT button and the paper
will feed to the starting position.