Star Micronics ATAR LC-500 - Manual (Page 23)

– 19 –
4. Set the adjustment lever to the value that matches the thickness of the
paper you are using. The setting for normal paper is 1. Set the lever
to a larger value for thicker paper, or to a smaller value for thinner
paper. See the table on page 15 for details.
4
5
1
2
3
Adjustment lever
1
2
3
4
5
5. Unlock the tractor on the left (when viewing the printer from behind)
by pulling its gray lever up, and adjust the position of the left tractor.
Note that there is a guide inside the printer in front of the left tractor.
The ▲ mark of the guide indicates where the left margin of the
printing will be.
6. Once the left tractor is aligned the way you want it, push the gray lever
back down to lock it in place.