Star Micronics ATAR LC-500 - Manual (Page 18)

– 14 –
ENGLISH
Loading cut-sheet paper
This section describes the procedure for loading cut-sheet paper. You can
also use fanfold paper. For details on using fanfold paper, see “Loading
fanfold paper” on page 18. If the fanfold paper is currently loaded, first
park the fanfold paper using the procedures described in “Parking
fanfold paper” on page 23.
1. Set the release lever to the cut-sheet position.
2. Set the adjustment lever to the value that matches the thickness of the
paper you are using. The setting for normal paper is 1. Set the lever to a
larger value for thicker paper, or to a smaller value for thinner paper.
4
5
1
2
3
Adjustment lever
1
2
3
4
5