Star Micronics ATAR LC-500 - Manual (Page 16)

– 12 –
ENGLISH
Important!
Make sure that the printer is unplugged from the AC outlet and that
the computer is turned off before connecting the parallel cable.
1. Connect one end of the parallel cable to the parallel port of your
computer. The parallel port is usually labeled “Printer,” “Parallel,”
“PRN,” “LPT1,” or something similar.
2. Connect the other end of the parallel cable into the socket on the back
of the printer and secure it in place with the clips.
Note:
If your computer is located to the right of the printer, run the cable
under the computer through the groove at the bottom of the printer.
This will prevent the cable from interfering with the fanfold paper.
You can also run the power cord under the printer.