Smeg SC112-2 User Manual
Smeg Kiln
Table of contents
Document Outline
- 1. INSTRUCTIONS FOR USE
- 2. Safety instructions
- 3. Instructions for disposal - Our environmental care
- 4. GET TO KNOW YOUR OVEN
- 5. Before installation
- 6. AVAILABLE ACCESSORIES
- 7. using the oven
- 7.1 General Description
- 7.1.1 Oven racks
- 7.1.2 Cooling system
- 7.1.3 Inside light
- 7.5.1 Setting the current time
- 7.6.1 Cooking with preset temperature
- 7.6.2 Changing the preset temperature
- 7.6.3 Using the minute minder
- 7.7.1 Semiautomatic cooking
- 7.7.2 Automatic cooking
- 7.8.1 Modifying the data set (during cooking)
- 7.8.2 Automatic cooking with a recipe
- 7.8.3 Selecting a recipe permanently
- 1 From ON status, select the recipe to modify with PT2. Within 5 seconds of the selection, hold down PT1 for at least 2 seconds. The symbol flashes indicating the recipe modification phase.
- 2 Now, by turning PT1, you can modify the cooking function to associate to the recipe being modified. Press PT1 to confirm.
- 3 Setting the temperature. The preset temperature will be displayed on DSP2 flashing; press PT1 to modify it. Press PT1 to confirm.
- 4 Modifying the cooking duration. The preset cooking duration will be displayed on DSP1 flashing. Turning PT1 you can modify it. Press PT1 to confirm.
- 5 Modifying the recommended runner. The recommended runner will flash; turning PT1 you can modify the number. Press PT1 to exit the programming, the symbol will stop flashing.
- 7.9 Table of predefined recipes:
- 7.10 Secondary menu
- 8. cooking with the oven
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE