beautypg.com

Siemens V1.0 User Manual

Page 18

background image

- 18 -

4.5 Download the PROFINET IO Device Names


a) Warning: Before downloading PROFINET IO device names, make sure that

ProfinetCommander is not running or HW Config will lock up.

b) To assign PROFINET IO device names, the PC and the IO devices must be physically

connected to the Ethernet network and operational.

c) In HW Config select a PROFINET IO device and then select “PLC->Ethernet->Assign

DeviceName…”.

d) Check the “Device name” column to see if the name is not assigned or has the wrong

name. If the name needs to be changed, select the appropriate name in the “Device
name” pop-down box, select the device to be renamed in the “Available devices” window,
and then select “Assign name”.


Select Device Name

Select Device

Assign name

Existing Device Name