Sanyo CLT-5810 - Manual (Page 32)

E30
CALLER ID
FEATURES
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view
the caller´s name and phone number on the display before you
answer the phone. The handset displays the phone number of the
incoming call, the name, and time. Additionally, you can dial the
displayed number and store the information for memory dialing.
Make sure you have turned on the Caller ID on Call Waiting feature.
(See page E11.)
Caller ID
1
When the Caller ID message is received, the display shows the
caller´s phone number along with the date and time. The
incoming call information is stored in the Caller ID record. If the
Caller ID service includes the caller´s name, the caller´s name
appears on the display (up to 15 letters).
When the telephone rings
You may receive any one of the following messages:
When invalid data is received
“Incomplete Data”
When a private name is received “Private Name”
When a private number is received “Private Number”
When a unknown name is received “Unknown Name”
When a unknown number is received “Unknown Number”
2
When you pick up the phone, the display changes to ¨ Talk ¨.
(Automatic Talk feature is set to on.)
5/11 12:30PM
SANYO
905-760-9944 The date and time received
Caller's name
Caller's phone number
• Data errors appear as ¨ ¨.
• If you answer a call before the Caller ID message is received (for example,
before the second ring), the Caller ID message will not appear.
• When the call is received via a telephone company that does not offer Caller
ID service, the caller´s phone number and name do not appear. (This includes
international calls.)
• When the call is via a private branch exchange (PBX), the caller´s phone
number and name may not appear.
Notes:
UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 30