Sanyo CLT-5810 - Manual (Page 27)

E25
DIRECTORY
1
Press the MEM key in standby mode,
¨
Select Memory ¨ is displayed.
2
Press the VOL/RING or VOL/RING
key, or enter a number (0 - 9) to select the
memory location you would like to edit,
and press the MEM or SELECT key.
3
Press the MEM or SELECT key a second time.
The following screen appears with the
memory location number that you have
selected in the display.
4
Press the VOL/RING or VOL/RING key to select ¨ Edit
MemoryXX ¨, then press the MEM or SELECT key. The following
screen appears. The cursor flashes,
indicating that the display is ready for
the name to be edited. When a name
has not been stored, the cursor appears
at the beginning of the second line.
5
Use the /TONE/ , #/ , DELETE/CH, or any number key to edit
the name. (See page E21.) To edit only the phone number, skip
this step.
6
Press the MEM or SELECT key.
The following screen appears.
The cursor flashes indicating that the display is ready for the
number to be edited.
7
Use the /TONE/ , #/ , REDIAL/PAUSE, DELETE/CH, or any
number key to edit the phone number. The phone number
cannot exceed 20 digits. (See page E20.)
If you don´t want to change the phone number, skip this step.
Editing a stored name and/or phone number
Select Memory
01 SANYO
02 Alison
Edit Memory01
Delete Memory01
Go Back
Store Name
SANYO
Store Number
9057609944
01:SANYO
9057609944
UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 25