Sanyo CLT-5810 - Manual (Page 24)

E22
DIRECTORY
For example, to enter SANYO.
1
Pick up the handset. Press the MEM key.
2
Enter a number or press the VOL/RING or VOL/RING key to
select a memory location.
3
Press the MEM or SELECT key.
4
Press the MEM or SELECT key again. (When there is information
already stored in the selected memory location, ¨
Edit MemoryXX ¨
is displayed. See page E25 for information on “Editing a stored
name and/or phone number”.)
5
Press 7 four times.
6
Press 2 once.
7
Press 6 twice.
8
Press 9 three times.
9
Press 6 three times.
10
When finished, press the MEM or SELECT key.
To continue to store the telephone number, proceed to step 7 on
page E20.
UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 22