Sharp SD-AT50 - Manual (Page 43)

E-38
SD-AT50(U)E4.fm 02/7/19
SD-AT50
ENGLISH
7
DX-AT50
Advance
d Features
- Enjoy
the
s
u
rr
o
und s
o
und (s
ound mode
) -
The input signal is recognized automatically and the indicator lights up.
! This indicator is lit when the 2ch signals are entered to extend them to the 5.1ch
surround sound.
! Even the 2ch sound recorded with Dolby Digital will be extended to the 5.1ch.
Notes:
! You can switch the audio while playing the disc of multiple types (Dolby Digital,
DTS, etc.) (page 34).
! When the surround mode is set to the standard or surround mode, the sound of
monaural signals is heard only from the center speaker.
! When the surround mode is set to stereo, the same monaural sound is reproduced
in the both of the right and left channels.
! The surround indicator is lit according to the input audio source.
Acoustic effect
Standard
The maximum of 5.1ch surround sound
is reproduced to provide three-dimen-
sional effect. The system automatically
emits the 5.1ch sound according to the
recorded audio signal.
"STANDARD" will appear.
Dynamic sound
You can enjoy the normal surround with various scenes.
MOVIE: The bass level is increased for powerful sound effect.
MUSIC: You can enjoy lively sound by producing the articulate sound.
NIGHT: Soft but powerful sound is achieved even at low volumes.
Surround
This mode provides expansive listening
area by emitting 2-channel sound.
"SURROUND" will appear.
Stereo
You can enjoy the great acoustic ef-
fects of the front speakers and
subwoofer.
"STEREO" will appear.
1 Front Left Signal Indicator
2 Center Signal Indicator
3 Front Right Signal Indicator
4 LFE indicator
5 Surround Left Signal Indicator
6 Surround Monaural Signal Indicator
7 Surround Right Signal Indicator
2 1 3
4
5 7 6