Sharp SD-AT50 - Manual (Page 31)

E-26
SD-AT50(U)E3.fm 02/7/19
SD-AT50
ENGLISH
7
DX-AT50
B
asic Operation
- Liste
n
in
g
t
o
the me
mor
ized s
ta
tion -
Listening to the memorized station
" Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
" To recall a memorized station
It's easier with the direct buttons on the remote control.
For 1st to 10th stations --- Select the preset number between "1" and "10/0".
For 11th to 40th stations --- Press ">10" and select the preset number.
Example: 28th station --- ">10", "2", "8"
Press buttons within 5 seconds.
" To erase all the contents of the preset
memory
[Back]
1
Perform steps 1 - 3 in "Listening to the radio" on page 25.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUNER
PRESET ( or ) button to select
the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER
button to store that station in mem-
ory.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorized will
be erased.
Press the TUNER PRESET ( or ) button to select the desired sta-
tion.
Preset channel
1 Hold the CLEAR button down for 3 seconds
or more.
2 While "CLEAR" is displayed, press the ENT
button.