SMC Networks Ethernet ISA Network Cards - Manual (Page 7)

The configuration program is automatically invoked once the
INSTALL command is entered and the Program Menu is
displayed (see Figure 1).
Note: This program may be run again by typing the
following command at the DOS prompt while you
are in the directory where the program is located:
SMCINST Press
Figure 1. Program Menu
3. Select Hardware Configuration from the Program Menu to
display the Main Menu (see Figure 2).
4. Select View Current Configuration from Main Menu to verify
the hardware settings (see Figure 3).
Q
UICK
S
TART
vi
ISA-FINAL 3/31/98 4:06 PM Page viii