SMC Networks Ethernet ISA Network Cards - Manual (Page 10)

Software Installation
NetWare Client Operating System
The following steps will be performed if you select “Yes” from
the EZ Link screen:
• the drivers and configuration files are copied
• STARTNET.BAT and NET.CFG files are created
• card’s components and corresponding cabling system are
tested
• network drivers are loaded
• you are logged on to the nearest Novell server, which
then prompts for your password
1. Select EZ Link from the Program Menu.
2. Select to run EZ Link.
• insert the driver diskette in Drive A: or B:
• type the location where you wish the driver to
reside
• Press
3. Select to return to the Program Menu.
4. Select Exit to quit the program.
ix
Q UICK S TART
ISA-FINAL 3/31/98 4:06 PM Page xi