Sanyo PLC-XP100BKL - Manual (Page 30)

0
Pointer Function
Pointer
✔ Note:
• You can choose the pattern of Pointer (Arrow/Finger/Dot) in the
Setting Menu (p. 52)
You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.
Press the POINTER button to activate the Pointer
function.
1
2
3
MOUSE POINTER button
POINTER button
To cancel the Pointer function, press the POINTER
button again or press any other button.
Use the MOUSE POINTER button to move the Pointer.
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
Move the pointer on
the screen with this
button.
MOUSE POINTER
button
R-CLICK button
L-CLICK button
Acts as right (click)
mouse button while
the projector and
a computer are
connected with a USB
cable.
Acts as left (click)
mouse button while
the projector and
a computer are
connected with a USB
cable.
Before operating the wireless mouse, connect your
computer and the projector with the supplied USB
cable (p. 20).
When the Pointer function is used, the wireless mouse
is not available.
When a USB cable is connected to the computer
and the projector, turn on the projector first, then
the computer. If you turn on the computer first, the
wireless mouse function may not operate properly.
1
2
Basic Operation