Sanyo PLC-XP100BKL - Manual (Page 13)

1
o
t
y
q STAND-By button
Turn the projector off (p.24).
r ON button
Turn the projector on (p.23).
t INPUT 1 – buttons
Select an input source (INPUT 1 – INPUT 3)
(pp.31–33).
y AUTO PC button
Automatically adjust the computer image to its
optimum setting (pp.28, 35).
i POINT ed 7 8 buttons
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.40).
r
Remote Control
!0
u
!2
q
!2 L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.30).
e SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
o SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.40).
To ensure safe operation, observe the following
precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, splay, or any other chemical
materials.
e
w WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
!1 NETWORK button
Select the Network input. (Optionally available).
w
i
u FREEZE button
Freeze the picture on the screen (p.28).
!1
!0 MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (p.30).
Part Names and Functions