Sanyo PLC-XP100BKL - Manual (Page 12)

1
w INPUT button
Select an input source (pp.31–33).
q ON/STAND-By button
Turn the projector on or off (pp.23–24).
e LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
r Point ed7 8 buttons
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.40).
!1 WARNING TEMP . indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.63, 69-
70 ).
t MENU button
Open or close the On-Screen Menu (p.25).
u POWER indicator
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode (p.52).
Side Control and Indicators
y SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.40).
i LAMP indicator
Light red during operations.
o LAMP REPLACE indicator
Light orange when the projection lamp reaches its
end of life (pp.59, 70).
!0 WARNING FILTER indicator
– Blink slow when the filter is being scrolled (pp.
56, 69).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(p.56, 70).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement (p.55, 56 70).
q
w
e
t y
r
Side Control Indicators (on the top panel)
u
i
o
!0
!1
Part Names and Functions