Samsung SNC-B5368 - Manual (Page 6)

Item Description
Inner Cover Cover used to protect the main unit.
Wing-Side Hook Tap on either end to remove the inner cover.
Monitor Out
The Test Monitor Cable is connected to a portable displayer and used for testing
the camera.
Bracket Used to install the camera on the wall or ceiling with the screws.
Upper Lid
Remove this for wiring purposes if you intend to install the camera on the
ceiling.
Zoom Lever Used to adjust or fix the zoom factor of the lens.
Focus Lever Turn it to the left or right to adjust the focus; turn it clockwise to fix the focus.
Tilt Screw Used to adjust or fix the tilt of the lens.
Release Lock
If you want to remove the bracket from the main unit or remove the camera
from the bracket, push this out and turn the main unit in the <
UNLOCK>
direction.
SNC-B5368-ENG-QG.indd 6 2009-08-19 오후 8:42:17