Sanyo POA-LN01 - Manual (Page 44)

44
Appendix
Examples of Connection
Direct connection
Connect the monitor (LCD01) to the control computer (PC05) directly.
Monitor Name: LCD01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Computer Name: PC10
IP Address : 192.168.0.10
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Hub
Monitor Name: LCD01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Connect the monitor (LCD01) to the control computer (PC05) via the hub.
✐ When the monitor is connected to the computer directly without hub, the UTP cross cable
should be used .
* UTP cross cable
UTP straight cable