Sanyo POA-LN01 - Manual (Page 24)

24
Basic Setting and Operation
Initial Settings
After installing this product onto the monitor, perform the following basic initial setting.
Press the Initial Setting button on the main menu to display the initial setting page.
The password can be set in this page.
Password Setting
This page is to set the password to restrict the access from an unauthorized person
through the network.
Enter the password onto the text box and press the Set button. The PJ-Net Organizer
begins restarting and it takes about 40 seconds. The web browser is automatically
closed (Quit) after 40 seconds. Access to the login page again. This is to perform the
login authentication firmly.
The default password [0000] means no password. You should change password from
the default in normal use. When you connect the monitor with this product to the net-
work, you should set a password. Only a four-digit numeric number is valid characters
for the password.