Sanyo POA-LN01 - Manual (Page 29)

29
SNMP Setting
SNMP Setting
This product can be used for SNMP (Simple Network Management Protocol) function.
Press the SNMP Setting button on the main menu and follow the below steps.
1
LCD Information (Setting SNMP Agent)
Select "Information" of sub menu, type the MIB of SNMP agent (A contact name and
a place of this product) or a community name (reference or setting) and press the Set
button for setting.
✐ MIB: Management Information Base
2
Trap Send (Setting Trap)
Select "Trap Send" of sub menu, type the host name (IP address) of SNMP manager
(PC) and a community name, and press the Set button for setting.